橡膠輪胎分離機Rubber tire separator
橡膠輪胎分離機Rubber tire separator一：型號：YULJ-1200（輪胎雙頭拉出機Pull the tire double machine）
機器組成部件：主機體2件，Machine component parts: the main body 2
二：液壓站1件，Hydraulic station 1 PCS。
三：升降臺1件， lifting platform  1PCS。
四：曲型斜體9.2米輸送帶1件，Italics 9.2 m curved conveyor 1 PCS。
五：自動剪臺1件（用作將輪胎剪斷，然后拉絲，拉絲后斷絲很小），
Automatic cut sets a (used tires cut, then drawing after drawing a small broken wire
抽出的鋼絲輸送帶長6米1件，Drawn steel wire conveyor length 6 m 1
六：拉力：25噸（內部壓力為10MPa時）Pull: 25 tons (when the internal pressure of 10MPa)
七：*大內部壓力：15MPa    Maximum internal pressure: 15MPa
八：機器總功率：9.2米輸送帶2.2kw，6米PVC輸送帶1.5kw，振動電機1.5kw,液壓站37.11kw,12米輸送帶2.2kw（可以不配置價格減RMB：8萬）,剪臺12.5kw，共57kw。
Total power: 9.2 m conveyor 2.2kw, 6 米 PVC conveyor 1.5kw, vibration motor 1.5kw, hydraulic station 37.11kw, 12 米 conveyor 2.2kw (can not configure Price Less RMB: 8 million) and shear station 12.5 kw, a total of 57kw.
九：冷卻系統：風冷    Cooling System: Air Cooled
處理輪胎范圍：?800-?1200mm（*大1400MM）
Handling tire range: ?800-?1200mm (maximum 1400MM)
十：處理能力：50-60個/小時，Processing capacity :50-60 / hour
十一：操作方式：可自動或手動按鈕式操控
Mode of operation: automatic or manual push-button control


十二：機器總重量：約15噸。Total weight: about 15 tons
十三：液壓件：油泵國產永靈，閥件臺灣，油管國產Hydraulic parts: pump domestic Yong Ling, Taiwan valves, tubing domestic
十四：電器：西門子+歐姆龍+國內品牌，PLC三凌
Appliances: Siemens + + domestic brands Omron, PLC Mitsubishi
電機：西門子Motor: Siemens
減速箱：SEW     Gearbox: SEW
十五：交貨期：70-80天左右。Delivery :70-80 days
十六：付款方式：先預付50%訂金，后付50%貨款出貨前付清，然后到廠驗收裝貨柜。Payment: prepay 50% deposit, 50% payment after payment before shipment paid, and then to the factory acceptance loaded containers.
P十八：貨柜要求2個40尺高柜裝運，Container requires two 40-foot shipping container注：以上價格含小量配件，其它安裝。Note: The above prices include small parts, other installation.
輪胎拉絲機設備技術參數Tire drawing machine equipment technical parameters
設備性能如下：Equipment performance as follows:
橡膠輪胎分離機Rubber tire separator一、處理輪胎范圍：直徑800~1200mm。A deal with tire range: 800 ~ 1200mm 
橡膠輪胎分離機Rubber tire separator（1）拉絲處理產量：約50~60個/小時，Brushed Yield: about 50 ~ 60PCS / hour
（2）冷卻系統：風冷（AH1012 兩臺）Cooling System: Air Cooled (AH1012 )  two  。
（3）三相電電源 （以上電壓和頻率需要根據你們的要求自行核實）Three-phase power supply (over voltage and frequency according to your needs to verify their own requirements)
橡膠輪胎分離機Rubber tire separator一、設備技術參數：Equipment technical parameters:
1、剪臺輸送機（M09208）：Shear conveyor (M09208)
1）驅動方式：鏈傳動方式Drive mode: Chain Transmission
2）機長：L＝3.45m，Captain: L = 3.45m
3）帶速：V＝  _ 13   m/min，Belt speed: V = _ 13 m / min
4）輸送物料：輪胎（直徑≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)
5）輸送量：60個/小時，Throughput: 60 / hour
6）電機減速機型號：    SK32100ADB     Motor reducer Model: SK32100ADB   
7）減速機廠家：  德國廣州公司（諾德）        Reducer manufacturers: Germany Guangzhou (NORD) 
2、自動剪臺（M09209）：Automatic cutting station (M09209):
1）壓力：25噸（內部壓力為10MPa時），Pressure: 25 tons (when the internal pressure of 10MPa).
      2）油泵型號及生產廠家：    浙江     The pump manufacturer and model: Zhejiang
3）閥門生產廠家：臺灣，  Valve manufacturer: Taiwan
4）3、曲型斜體9.2米輸送機（M09210）：Italics 9.2 m curved conveyor (M09210):
1）帶速：V＝ 10.6      m/min   Belt speed: V = 10.6 m / min
2）輸送物料：輪胎（直徑≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)
3）輸送量：60個/小時，Throughput: 60 / hour
4）電機減速機型號：    SK32100      Motor reducer Model: SK32100    
5）減速機廠家：  德國廣州公司（諾德）          
4、拉絲機（M09211）：Drawing Machine (M09211)
（1）單側拉力：25噸（內部壓力為10MPa時），設計*大內部壓力：15Mpa。Unilateral force: 25 tons (internal pressure of 10MPa), the design maximum internal pressure: 15Mpa.
（2）拉鉤的材質  45#  Retractors material 45 #
（3）V槽的材質  45#,V groove material 45 #
(4)油泵型號及生產廠家：國產永靈；Pump models and manufacturers: Domestic Yong Ling
(5)閥門生產廠家：臺灣；Valve manufacturers: Taiwan
5、鐵鋼絲輸送機（M09211）：Iron wire conveyor (M09211)
（1）帶速：V＝   10.3   m/min，Belt speed: V = 10.3 m / min
（2）輸送物料：輪胎（直徑≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)
8）（3)輸送量：60個/小時，Throughput: 60 / hour
（4）電機減速機型號：SK32100ADB     Motor reducer Model: SK32100ADB
（5）減速機廠家：諾德。Reducer manufacturers: Nordisk
三、電氣參數：Electrical parameters
1、低壓電氣元件采用SIEMENS品牌,PLC采用三菱PLC進行控制。每個設備均具有啟動信號，停止信號，急停信號，報警點，故障復位等**措施。SIEMENS brand low voltage electrical components, PLC Mitsubishi PLC control. Each device has a start signal, a stop signal, emergency stop signal, alarm, fault reset and other security measures.
2、電柜顏色為乳白色，每臺機器獨立一個電柜。Cabinet color is white, each machine independently an electrical cabinet