自動注塑擠出中央供料系統集中送料系統具有以下特點： 

一、完善服務：完善的售后服務，工程師親自到廠保養維修，讓您完全無后顧之憂。 運轉狀態LED顯示面板： 依機臺陳列方式設計，明白指示機臺位

置，無論是監控動自動注塑擠出中央供料系統采用真空傳送方式，通過集中的管路系統將塑料原料從儲料罐輸送到中央除濕干燥系統，然后將干燥后的原

料輸送到每臺注塑機中。

1、達安泰公司內部高效高技能的施工隊伍，確保施工進度及整體工程與原有注塑車間的無暇銜接

2.由專業工程師為您施工、安裝、到測試完成后交機，一系列的專業服務，并提供必要的教育訓練及技術指導。

3.提供您*高品質、高價值的產品。我們的產品一應俱全，從除濕干燥機到自動計量混料機、料斗干燥機、全自動真空式填料機、冷凍機等，應有盡有。

品質***得您信賴。

4.從廠房規劃、水電工程設計、無塵室工程設計、技術咨詢、到整廠流程規劃，由專人為您提供*完整、*專業的設計規劃。

二、節能：由于采用了中央供料的方式、相對應地減少了很多的單機設備，也就節省了電能及減少維護費用。自動注塑擠出中央供料系統操作簡易，只需

要少數的幾個人即可以控制整個注塑工廠的供料需求，從而減少了大量的勞動力成本。其次、減少了在注塑機旁邊的原料帶及相應的輔助設備、提高了空

間的利用率。

三、個性化：達安泰自動注塑擠出中央供料系統獨特集中粉塵回收系統，清理更便捷、環保效果更是達到10萬級無塵室作業要求標準，并降低噪音，*終

可實現無人化的自動化生產車間，樹立起現代化工廠管理的形象。自動注塑擠出中央供料系統可以做到不同的使用用戶，不同的車間特點，不同的原料使

用要求。都可以依實際的需要來設計出*優化的方案。

四、現代化工廠形象：自動注塑擠出中央供料系統將使原料及粉塵對注塑生產的污染減至*底的程度，從而可以保持潔凈的生產車間，

五、高效：能夠?qū)嵭懈叨鹊淖詣踊刂啤⒈O(jiān)測等、并能滿足24小時不停機的生產需要自動注塑擠出中央供料系統可實現將多種原料自動供給多室任意的注

塑加工設備使用，在這其中可包括原料的干燥處理、配色處理、以及按比例的粉碎回收料利用，。 

達安泰公司自動注塑擠出中央供料系統采用“一臺機器一根管”的設計方式，保證整個系統的空氣對原料進行輸送，防止除濕干燥后的原料回潮。同時在每

個輸運行穩定，絕無堵料的現象發生。它配合中央除濕干燥系統使用，可使用除濕干燥送循環后會對輸送管線進行清理，確保管路內沒有殘余的粒料，在

避免原料回潮的同時，也保證了加入注塑機中的原料性能的一致。在真空負壓作用下原料中原由的粉塵會通過粉塵過濾系統被過濾出來，有助于提高成型

產品的質量。

(供料系統,中央供料系統,大型除濕系統，混色系統，拌料，自動開包卸料站)

以上是中央供料系統的介紹，歡迎新老客戶朋友前來定制自動擠出中央供料系統

Automatic Injection Molding The central feed system uses vacuum transport to transport the plastic material from the storage tank to the central dehumidification drying system through a centralized piping system and then transport the dried raw material to each injection molding machine.

D'Aantai automatic injection molding out of the central feeding system using "a machine a tube" design, to ensure that the entire system of air to transport raw materials to prevent dehumidification after drying raw materials resurgence. At the same time in each transport line is stable, no blocking material phenomenon occurred. It is used with the central dehumidification drying system,

You can use the dehumidification drying cycle will be sent to clean the pipeline to ensure that there is no residual pellet in the pipeline,

In order to avoid the return of raw materials at the same time, but also to ensure that the injection molding machine to join the performance of raw materials consistent. In the vacuum under the action of raw materials in the original dust will be filtered through the dust filter system, help to improve the quality of molding products.

Automatic Injection Molding Central Feeding System The centralized feeding system has the following characteristics:
First, the efficient: automatic injection molding Central feeding system can be achieved by a variety of raw materials automatically supply multi-chamber arbitrary injection molding equipment used, which may include raw materials, drying, color processing,

As well as the proportion of the use of crushed recycled materials, to carry out a high degree of automation control, monitoring, etc., and to meet the 24-hour non-stop production needs.
 
Second, energy saving: automatic injection molding Central feeding system is easy to operate, only a few people can control the injection of the entire plant demand for the plant, thereby reducing the large number of labor costs. Second, the reduction in the injection molding machine next to the raw material and the corresponding auxiliary equipment, improve the utilization of space.

In addition, due to the use of the central way of supply, corresponding to reduce a lot of stand-alone equipment, also saves energy and reduce maintenance costs.
Third, the individual: automatic injection molding Central feeding system can be done using different users, different workshop characteristics, different requirements for the use of raw materials. Can be designed according to the actual needs of the optimal solution.


Fourth, the modern factory image: automatic injection molding out of the central feeding system will make raw materials and dust on the injection molding production to minimize the level of pollution, which can maintain a clean production workshop, and Da Aetai automatic injection extrusion central feeding system Unique concentration of dust recovery system, clean more convenient, environmental protection effect is to reach 100,000 clean room operating requirements standards, and reduce noise, and ultimately can achieve unmanned automated production workshop, and establish a modern factory management image.
Fifth, improve the service: Da Aetai company within the highly efficient and highly skilled construction team to ensure that the construction schedule and the overall project and the original injection workshop
1, from the plant planning, hydropower engineering design, clean room engineering design, technical advice, to the whole plant process planning, by the

People to provide you with the most complete and most professional design and planning.
2. To provide you with the highest quality, high value of the product. Our products are readily available, from dehumidification dryer to automatic metering mixer, hopper dryer, automatic vacuum filling machine, freezer, everything. Quality is definitely worth your trust.
3. By professional engineers for your construction, installation, to complete the test after the delivery, a series of professional services, and provide the necessary education and training and technical guidance.
4. Perfect after-sales service, engineers personally to the factory maintenance, so you completely worry-free. Operating status LED display panel: according to the machine display design, understand the location of the machine, whether it is monitoring


(Feeding system, central feeding system, large dehumidification system, color mixing system, spices, automatic unpacking station)
Above is the introduction of the central feeding system, welcomed the new and old customers to come to custom custom injection extrusion center feeding system